Innovate LC-2 bredbandslambda

Nyhet

Komplett kit med styrenhet, kablage, lambdasond och tillbehör.

Denna modell används vanligtvis för loggning av lambdavärde till ECU, Dyno etc.

2st programmerbara 0-5V utgångar.

Lambdamutter och plugg ingår.

Total längd på kablaget är ca 2,5m.

Komplett kit med allt som behövs för installation.

Mer detaljer

Lägg till i min önskelista

Mer information

The evolution of the world’s most popular stand alone digital O² sensor controller, the Innovate Motorsports LC-2 builds upon the legacy of the LC-1 by adding simplicity and leading edge technology. The LC-2 utilizes the only 100% digital wideband air/fuel ratio technology on the market! The LC-2’s patented award-winning DirectDigital™ signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LC-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LC-2 includes a digital input/output, 2 full-programmable analog outputs, and is ideal for applications such as dynamometers, data acquisition systems, standalone ECUs, and gauges. The LC-2 can also be "daisy-chained" for cost-effective individual cylinder monitoring, and is fully compatible with our Modular Tuning System (MTS). Key features include:

KEY FEATURES

  • Patented DirectDigital™ Wideband Technology
  • Wideband O² Compatible with ALL fuel types
  • Ability to calibrate O² sensor for maximum accuracy
  • Integrated dual-color status LED (Green/Red)
  • *Two configurable linear 0-5v analog outputs
  • Optional sensor cable lengths available: 3ft, 8ft (Included), and 18ft
  • Positive lock connectors for all connections
  • Innovate MTS serial in/out
  • Serial connection to your PC
  • Real-time display data on screen and/or with powerful LogWorks software

*Two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog Output #1 (Yellow) is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR; Analog Output #2 (Brown) 1.1 volt = 14 AFR and .1 volt = 15 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.

Specifications

Power

 
Operating Voltage 9.8V to 16V DC
Input Current, O² heater initial warm-up 2.0A nominal, 3A max
Input Current, O² normal operation 0.8A nominal, 1.1A max

Environmental

 
Operating ambient temperature 0° to 140° F (−17.78° to 60° C)
Storage ambient temperature −40° to 185° F (−40° to 85° C)
Water resistance Splash resistant, non-submersible

Sensors

 
Compatible Types Bosch™ LSU4.2
Bosch™ Heater Control Digital PID via pump-cell impedance
Measurements
 
Lambda .61 to Free Air
Air/Fuel Ratio 7.35 to Free Air (gasoline), Fuel Type Programmable
0-20.9%
Accuracy
 
For Lambda Accurate to +/- .007 (.1 AFR)

Response Time

 
Free Air to Lambda < 100 mS ( < 25 mS typical)
Inputs
 
Serial 1, Innovate MTS Compatible
Outputs
 
Analog

2, 0-5VDC, 10 bit resolution, programmable

Serial 1, Innovate MTS Compatible
Communication
 
Serial MTS (Innovate Modular Tuning System) compatible

Omdömen

Inga kommentarer finns för tillfället.

Skriv din recension

Innovate LC-2 bredbandslambda

Innovate LC-2 bredbandslambda

Komplett kit med styrenhet, kablage, lambdasond och tillbehör.

Denna modell används vanligtvis för loggning av lambdavärde till ECU, Dyno etc.

2st programmerbara 0-5V utgångar.

Lambdamutter och plugg ingår.

Total längd på kablaget är ca 2,5m.

Komplett kit med allt som behövs för installation.

Skriv din recension